Who builds custom decks in Frisco, TX?
Archetex Outdoor Design Co. is a Dallas-based deck builder that serves Frisco, run by its owner, Matthew, and rated 5.0 on Google. It builds custom composite and wood decks, covered decks and pavilions, designed around the home's real elevation and how the yard is used. Footings and framing are sized to the house and the load, and railings are built to code from the start. Estimates are free, with a written price after a site visit.
Frisco is about thirty miles north of Dallas in western Collin County, with part of the city in eastern Denton County, according to the Handbook of Texas. Archetex covers it along with Plano next door and McKinney to the east. This page is about hiring a builder: what Frisco yards usually need, the city and HOA steps a builder has to handle, and how to compare quotes. For the numbers, our Frisco and McKinney deck cost guide and Plano and Frisco permit guide go deeper.
What Frisco back yards usually need from a deck builder
Frisco decks are mostly built behind newer homes, in neighborhoods with an HOA. The Handbook of Texas puts Frisco's population at 6,141 in 1990 and 33,714 in 2000, and the US Census Bureau counted 200,509 in 2020 and estimates 236,955 for July 2025. A city that has grown that much since 1990 is mostly housing built since then, which shapes the work in three ways:
- The yard has a small builder patio. Many homes come with a covered concrete slab off the back door that fits a table and not much else. A deck beside it, or a deck that replaces it, is the most common job.
- The house is new, so the deck has to match it. Board color, railing style and any roof over the deck are usually chosen to suit the house and the HOA's rules, not just the budget.
- Space is planned around other features. Frisco yards often have, or will get, a pool, an outdoor kitchen or a fire pit. Those set limits on where the deck goes, so it pays to design them together.
Archetex plans patios, decks and outdoor living as one design, starting with how you use the yard, then grading, drainage and how the space connects to the house. See the outdoor living page if the deck is one part of a bigger plan.
Frisco deck permit rules, in brief
Expect to need a City of Frisco permit for a deck. The city's fee schedule, effective October 1, 2026, lists decks under outdoor improvements at $75 plus $0.59 for each square foot of gross area, up to a maximum of $550. Starting work without a permit is charged a double permit fee. Frisco adopted the 2024 International Residential Code with local amendments, effective March 1, 2026. We could not open the amended code itself, so we can't confirm whether Frisco exempts any small decks. Ask Building Inspections before you assume one is exempt.
What Frisco asks for is spelled out in its Residential Alteration Submittal Requirements (Form 4038, February 2026). For patio covers, arbors, gazebos and similar structures, the closest category for a roof or pergola over a deck, the form asks for:
- the property's plot plan (survey), marking the structure and its distances to all property lines;
- framing drawings with length, width and maximum height, a front and side elevation, a material list, and post and beam sizes;
- if attached to the house, the bracket types, the bolt size and length, and what they attach to (for example brick or the main supports);
- a footer detail sheet: how posts are attached, and for posts set below grade, the hole depth and whether there is concrete and rebar;
- an engineered design if the structure is aluminum, steel or vinyl.
Setbacks vary by lot and zoning. Frisco's Building Inspections FAQ says accessory structures must meet all setback criteria and zoning requirements for the lot, and tells homeowners to contact Building Inspections for the setbacks that apply to them. Inspections are requested through eTRAKiT once field documents are in, according to the city's 2026 inspection guide. Building Inspections is at 6101 Frisco Square Blvd., 3rd floor (972-292-5301). The fee math for common deck sizes is in our permit guide.
Planning a fire pit, kitchen or cover with a Frisco deck
A fire pit has to sit well away from a deck in Frisco. The city's Form 4038 says that, as required by the International Fire Code, a fire pit must be built 15 feet from any main structure and 10 feet from any combustible item, measured from the edge of the pit. A wood or composite deck is combustible, so the deck and the fire pit need to be laid out together. Each feature is also its own line on the permit: outdoor kitchens and fireplaces are billed as an outdoor amenity at $75 plus $25 per additional element, up to $150, and outdoor kitchen sinks must drain to the sanitary sewer.
A roof over the deck is billed the same way as the deck: $75 plus $0.59 per square foot, up to $550, for a patio cover or arbor. Archetex builds covered decks, pavilions and black slatted pergolas. See covered patios and pergolas for the options.
What does a deck cost in Frisco in 2026?
Block Renovation's 2026 Dallas-area guide puts a pressure-treated wood deck at $15 to $30 per square foot installed and composite at $25 to $50. Covers, height, stairs and railing add to that, and Frisco's permit fee is on top. These are market figures, not Archetex prices.
| Item | Typical cost | Source |
|---|---|---|
| Pressure-treated wood deck | $15 to $30 per sq ft installed (Dallas area) | Block Renovation, 2026 |
| Composite deck | $25 to $50 per sq ft installed (Dallas area) | Block Renovation, 2026 |
| Floating (freestanding) deck | $20 to $40 per sq ft (national) | Fixr |
| Covered deck | $40 to $100 per sq ft (national) | Fixr |
| Composite railing | $80 to $165 per linear ft installed (national) | Fixr |
| Metal railing | $45 to $85 per linear ft installed (national) | Fixr |
| Frisco deck permit | $75 plus $0.59 per sq ft, up to $550 | City of Frisco fee schedule, eff. 2026-10-01 |
| Composite deck addition, typical project | $23,519, with 92.1% recouped at resale (Dallas) | Cost vs Value 2025 |
As a worked example from the city's schedule, a 300 sq ft deck permit comes to $75 + (300 x $0.59) = $252. For Frisco price snapshots and more sizes, see the Frisco and McKinney cost guide. Archetex gives a written price after a free site visit.
HOA approval for a deck in Frisco
In Frisco, HOA approval is usually the first step, not the last. The City of Frisco says there are more than 200 HOAs in the city, runs a Five Star Neighborhood program that recognizes HOAs that take pride in their communities, and keeps a voluntary HOA directory of management companies and board members. Its Form 4038 repeats the same note for nearly every structure type: some subdivisions require HOA approval, so contact your HOA. Block Renovation's 2026 guide adds that master-planned communities account for a significant portion of homes in Frisco and that their guidelines govern what you can build in the back yard.
Get the association's written approval before the city permit, since a change the HOA asks for can mean redrawing the plans Frisco reviewed. Archetex can supply the site plan, elevations, and the material and color details an architectural committee asks for. Our DFW HOA approval guide covers what to send.
How Matthew builds a deck in Frisco
Every deck follows the same four steps:
- Consultation and material selection. We measure the door height and the yard, mark the property lines and any pool, kitchen or fire pit, and talk through how you will use the deck and what your HOA allows.
- Footings and framing. Footings are laid out to the grade and sized to the load and the clay, and the frame is built to the real height of the house.
- Decking and railing installation. Composite, cedar or pressure-treated boards, stairs and railing go on, with the railing built to code from the start.
- Final walkthrough and cleanup, with care recommendations for the material you chose.
The ground matters as much as the boards. Collin County, where most of Frisco sits, lies almost entirely within the Blackland Prairie, according to the Handbook of Texas, and Blackland clays such as Houston Black have high shrink-swell potential and can crack up to 4 inches wide when dry, according to the USDA soil series description. Footings, grading and drainage are designed with that in mind. If you are weighing boards, our composite deck page and materials comparison help.
How to compare deck builders in Frisco, and what a written quote should include
Pick a builder who asks about your HOA, your property lines and the rest of the yard before quoting a price per square foot. Then compare quotes line by line. A good written quote for a Frisco deck should list:
- the deck's size, height above grade, and whether it is attached;
- the decking material, color and board line, the framing lumber, and the footing count, size and depth;
- the railing type and length, and the number of stairs;
- who prepares the Form 4038 drawings and the HOA packet, who pulls the permit, and whether the fee is included;
- how drainage is handled where the deck meets the yard and any pool or patio;
- the schedule, payment stages, and cleanup at the end.
Read reviews and look at finished work. Homeowners who have reviewed Archetex mention communication, punctuality, help with design and a clean site. See recent projects on our work page, and use our questions to ask a deck contractor list when you interview builders.
Decks in Frisco and nearby
Archetex serves Frisco along with its neighbors. See the Frisco service area page, the McKinney page, the main Dallas deck builder page, and the Dallas deck guide for the full picture. To start, send a photo of the back of the house or call Matthew on (430) 318-6275.




