This guide is for homeowners in Frisco and McKinney who are pricing a new deck. It puts the published prices for both cities side by side, compares them with newer Dallas-area figures, and then covers what each city adds: Frisco's actual deck permit fee, McKinney's permit status, HOA review, and the clay under your yard. Every number is labeled by place and date. If you want someone to look at your yard, we are a deck and covered patio builder in Frisco, but the figures below are market prices, not ours.
One thing up front: there is no 2026 price list for Frisco or McKinney alone. The city figures here come from HomeBlue's 2021 pages for each city, based on "feedback provided by local deck builders," so we pair them with Block Renovation's 2026 Dallas-area figures. Read the two together, not as one local price.
How much does a deck cost per square foot in Frisco and McKinney?
In both cities a new deck runs roughly $17 to $34 per square foot installed, from pressure-treated pine at the low end to composite at the high end, according to HomeBlue's 2021 Frisco and McKinney pages. Block Renovation's 2026 Dallas-area figures span $15 to $30 for pressure-treated and $25 to $50 for composite.
Here is how the four materials most people ask about line up across the two cities, the Dallas area and national figures.
| Material (installed, per sq ft) | Frisco (HomeBlue, 2021) | McKinney (HomeBlue, 2021) | Dallas area (Block Renovation, 2026) | National (Fixr, 2023) |
|---|---|---|---|---|
| Pressure-treated pine | $17 to $19 | $17 to $20 | $15 to $30 | Not used here |
| Cedar | $27 to $31 | $28 to $31 | Not listed | Not used here |
| Composite | $32 to $34 | $32 to $34 | $25 to $50 | $28 to $40 |
| Ipe | $51 to $54 | $52 to $55 | Not listed | Not used here |
HomeBlue prices eleven materials for each city. The two pages are nearly identical, so by this source the two markets price decks about the same way:
| Material | Frisco, per sq ft installed (HomeBlue, 2021) | McKinney, per sq ft installed (HomeBlue, 2021) |
|---|---|---|
| Pressure-treated pine | $17 to $19 | $17 to $20 |
| Bamboo | $21 to $24 | $22 to $24 |
| Cedar | $27 to $31 | $28 to $31 |
| Composite | $32 to $34 | $32 to $34 |
| Redwood | $36 to $39 | $36 to $39 |
| Garapa | $36 to $39 | $36 to $39 |
| Cumaru | $37 to $40 | $37 to $40 |
| Massaranduba | $39 to $42 | $39 to $42 |
| Tigerwood | $43 to $46 | $43 to $46 |
| Ipe | $51 to $54 | $52 to $55 |
| Teak | $53 to $56 | $54 to $57 |
What an installed price actually pays for
Most of an installed price is not the boards you walk on. Trex says that on most professionally installed projects, materials are up to one third of the total cost. Fixr's national figures put labor alone at $10 to $35 per square foot (2023), and Trex says the materials for a composite deck, meaning substructure, decking, hardware and fasteners, run $15 to $30 per square foot, not counting its Signature line.
So if you see an online "Frisco deck price" that works out to a few dollars a square foot, it can't include footings, a frame, railing, labor and a permit. Ask what is in the number before you compare it with a real quote.
What does a deck cost in Frisco and McKinney by size?
In HomeBlue's 2021 figures, a 400 sq ft deck costs about $6,600 to $7,800 in pressure-treated pine and $12,800 to $13,600 in composite, installed, in either city.
| Deck size | Frisco, pressure-treated | Frisco, composite | McKinney, pressure-treated | McKinney, composite |
|---|---|---|---|---|
| 100 sq ft | $1,700 to $1,900 | $3,200 to $3,400 | $1,700 to $2,000 | $3,200 to $3,400 |
| 200 sq ft | $3,300 to $3,900 | $6,400 to $6,800 | $3,300 to $3,900 | $6,500 to $6,800 |
| 300 sq ft (for example 15 x 20), calculated | $5,100 to $5,700 | $9,600 to $10,200 | $5,100 to $6,000 | $9,600 to $10,200 |
| 400 sq ft | $6,600 to $7,800 | $12,800 to $13,500 | $6,700 to $7,800 | $12,900 to $13,600 |
| 600 sq ft | $9,900 to $11,700 | $19,200 to $20,300 | $10,000 to $11,700 | $19,400 to $20,500 |
Source: HomeBlue's 2021 Frisco and McKinney pages. The 300 sq ft row is calculated from HomeBlue's 2021 per square foot prices for each city; the other rows are HomeBlue's own totals.
Run the same sizes through Block Renovation's 2026 Dallas-area ranges and the spread is much wider. A 300 sq ft deck comes to $4,500 to $9,000 in pressure-treated and $7,500 to $15,000 in composite. A 400 sq ft deck comes to $6,000 to $12,000 in pressure-treated and $10,000 to $20,000 in composite (calculated from Block's per square foot ranges).
All of these numbers are for the deck itself. Railings, stairs, a roof, tearing out an old deck and the permit come on top. For more sizes, see our guide to deck cost by size.
Wood or composite in Frisco and McKinney: what's the price gap?
Composite costs close to twice as much per square foot as pressure-treated pine on HomeBlue's 2021 city pages: $32 to $34 against $17 to $19 in Frisco and $17 to $20 in McKinney. Cedar sits between them, at $27 to $31 in Frisco and $28 to $31 in McKinney.
The newer Dallas-area figures narrow that gap on paper because the ranges are so wide: Block Renovation's 2026 numbers are $15 to $30 for pressure-treated and $25 to $50 for composite. Advantage Lumber, a decking retailer, puts a professionally built deck at $25 to $60 per square foot installed nationally in 2026, and $40 to $80 for premium builds.
On a 300 sq ft deck, HomeBlue's 2021 city prices come to $5,100 to $5,700 in pressure-treated and $9,600 to $10,200 in composite in Frisco, and $5,100 to $6,000 and $9,600 to $10,200 in McKinney (calculated from the per square foot prices).
How to choose:
- Pick pressure-treated pine if the lowest upfront price matters most and you are fine cleaning and sealing the deck on a schedule.
- Pick cedar if you want real wood and a price between pine and composite.
- Pick composite if you would rather pay more now and skip staining. A composite deck builder can price composite and wood on the same layout so you see the real gap for your yard.
Frisco vs McKinney vs Plano vs Dallas: is a deck more expensive up north?
Slightly. On the same publisher's same-date pages, Frisco and McKinney run $1 to $4 per square foot above Dallas, depending on the material, and within $1 of Plano on every line.
| City (HomeBlue, 2021) | Pressure-treated pine | Cedar | Composite | Ipe |
|---|---|---|---|---|
| Frisco | $17 to $19 | $27 to $31 | $32 to $34 | $51 to $54 |
| McKinney | $17 to $20 | $28 to $31 | $32 to $34 | $52 to $55 |
| Plano | $17 to $19 | $28 to $31 | $32 to $34 | $52 to $55 |
| Dallas | $16 to $18 | $26 to $29 | $30 to $32 | $49 to $51 |
| Frisco vs Dallas (calculated) | +$1 | +$1 to $2 | +$2 | +$2 to $3 |
| McKinney vs Dallas (calculated) | +$1 to $2 | +$2 | +$2 | +$3 to $4 |
That is a gap between 2021 web pages, not a measured 2026 premium, so treat it as a hint. On a 400 sq ft pressure-treated deck, HomeBlue's Dallas page gives $6,200 to $7,400, against $6,600 to $7,800 in Frisco and $6,700 to $7,800 in McKinney.
The bigger differences are in the homes and the rules. The U.S. Census Bureau puts the median value of owner-occupied homes at $642,100 in Frisco and $471,800 in McKinney (2020 to 2024). Both cities have grown fast: Frisco had 33,714 people in 2000 and McKinney 54,369, according to the Handbook of Texas, and the Census Bureau's July 2025 estimates are 236,955 for Frisco and 236,001 for McKinney. That means many backyards are on newer homes, often in HOA neighborhoods.
Those home values are context, not a price driver: a deck doesn't cost more because the house is worth more. For the neighboring cities, see what a deck costs in Plano and our Dallas deck prices.
How much is a deck permit in Frisco?
Frisco's fee schedule, effective October 1, 2026, prices a residential deck at $75 plus $0.59 per square foot of gross area, up to a maximum of $550. Patio covers, arbors and conventionally framed sheds are priced the same way.
Here is what that works out to at a few common sizes (calculated from Frisco's 2026 deck rate, not a quote from the city):
| Deck size | Frisco deck permit fee (calculated, 2026 schedule) |
|---|---|
| 200 sq ft | $193 |
| 300 sq ft | $252 |
| 400 sq ft | $311 |
| 500 sq ft | $370 |
| About 805 sq ft and up | $550 (the cap) |
Add any application or electrical permit fees the city charges on top of those numbers. The same schedule lists a $50 non-refundable application fee just above its outdoor improvements section, and it isn't clear from the layout whether that applies to decks, so ask. Note too that a "Deck only/concrete" line in the swimming pool section is for pool decks, not backyard decks.
Two other lines on the schedule can cost you:
- Starting without a permit: Frisco charges a double permit fee for non-emergency work begun before the permit is issued.
- Failed inspections: the residential re-inspection fee is $50. Frisco's February 2026 inspection checklist (Form 4032) still lists $30, but the October 2026 fee schedule is the newer document.
For comparison, Fixr's 2023 national figure for a deck permit is $100 to $500 depending on the area. The calculated Frisco fees above, $193 to $370 for 200 to 500 sq ft, fall inside that range.
Do you need a permit for a deck in Frisco?
Plan on one. Frisco prices deck permits in its fee schedule and says permits are required to erect or enlarge any new structure, but its local code amendments weren't available in a form we could read, so confirm small or low decks with Building Inspections before you skip a permit.
What we can confirm from the city's own documents:
- Code edition: Frisco enforces the 2024 International Residential Code with local amendments (Ordinance 2026-01-10), effective March 1, 2026.
- Accessory structures: the city's Building Inspections FAQ says all accessory structures, such as patio covers, storage buildings, gazebos and arbors, need a building permit before they go up, and must meet setback and zoning rules.
- Contractor registration: all contractors who work in Frisco must be registered before a permit is issued.
- Inspections: online inspection requests close at 7 a.m. on the day of the inspection.
Frisco doesn't publish a deck checklist that we could find. For patio covers, arbors and similar structures, its Form 4038 asks for a plot plan showing distances to all property lines, framing drawings with post and beam sizes and maximum height, a footing detail (hole depth, concrete, rebar), and, if the structure is attached, what it attaches to and with which brackets and bolts. If you are adding a roof over the deck, expect that list to apply.
Questions go to Frisco Building Inspections at (972) 292-5301 or bicsr@friscotexas.gov.
Submittal steps, inspections and contractor registration for both cities are in deck permits in Plano, Frisco and McKinney.
Deck permits and fees in McKinney
McKinney says it adopted the 2024 codes, including the 2024 International Residential Code, effective October 1, 2025, and you apply through the city's online portal. Its current fee schedule isn't posted anywhere we could open, so ask Building Inspections for the deck fee before you budget it.
Does a small deck need a permit in McKinney? McKinney's ordinance doesn't publish its own deck rule. Its one local change to the permit exemption list covers one-story detached accessory structures up to 120 sq ft, which says nothing new about decks. In Plano, which uses the same 2024 code, a deck is exempt only if it is 200 sq ft or less, no more than 30 inches above grade, not attached to the house and not serving the required exit door (see the Plano guide linked above). Ask McKinney Building Inspections (469-617-4800) before you assume yours is exempt.
A few more McKinney details worth knowing:
- How you apply: the city's Home Repairs page sends accessory structures to the "Residential Alteration" permit in its online portal, which includes detached patio covers and shade arbors. Decks aren't named there.
- Older fee rates, for reference only: McKinney's 2022 fee packet (the current one could not be opened) charged single-family additions and alterations $0.68 per gross square foot of the affected area, with a $100 residential plan review fee. That packet had no deck line, so don't use it to work out a deck fee.
- Wet sites: if an inspector finds the site too wet and the inspection wasn't canceled, McKinney issues a red tag and a $50 re-inspection fee.
- Fraud alert: McKinney says real invoices come only through its Citizen Self Service portal, and the city doesn't charge an "Application Approval Fee." Don't pay anyone who asks for one.
If you are in McKinney and want the deck designed and priced, see our page for a deck builder in McKinney.
HOA approval in Frisco and McKinney: budget time, not just money
If your home is in an HOA, get written approval before you finalize the design or apply for the permit. In one large McKinney HOA, a 2022 copy of its rules gives the committee up to 30 days to review an application.
HOAs are common in both cities. The City of Frisco says there are more than 200 HOAs in Frisco, and Block Renovation says master-planned communities account for a significant portion of homes in Frisco and McKinney. Frisco's Form 4038 repeats the same line for every outdoor structure type: "Some subdivisions require HOA approval. Please contact your HOA for approval." McKinney's older 2021 alteration and addition form said the city encourages HOA approval before you submit.
What HOA rules typically control, according to Block's 2026 Dallas-area guide (check your own covenants, since yours may differ):
- Maximum heights for patio covers and pergolas
- Setbacks, often 5 to 15 feet from rear and side property lines
- Approved materials and colors for visible structures
One McKinney example: Stonebridge Ranch has more than 70 villages, each with its own guidelines. A 2022 copy of its Modifications Committee page says the governing documents give the committee up to 30 days to review each application, and its volunteers aim to decide within 14 business days. That is one HOA's rule from 2022, so check your own.
Clay soil and footings: why the ground affects the price
Most of Collin County lies in the Blackland Prairie, where clays such as Houston Black shrink and swell, so footing design matters a lot here. According to the Handbook of Texas, apart from a small part of its western edge, Collin County lies within the Blackland Prairie, with deep clayey soils over marl and chalk across its central and western parts.
Frisco is a little different. It lies in western Collin County with a portion in eastern Denton County, and only an eastern sliver of Denton County is on the western edge of the Blackland Prairie. Our reading of those two facts: Frisco sits near the western edge of the Blackland Prairie, so soil can vary from lot to lot.
Blackland Prairie clays such as Houston Black have high shrink-swell potential and crack 1/2 to 4 inches wide at a 12-inch depth in dry periods, according to the USDA. We can't tell you which soil is under your yard.
The City of Frisco treats soil movement seriously enough that every new-home foundation package must include a soils report stating plasticity index and "potential vertical rise," with engineer-sealed foundation plans. That rule is for new houses, not decks, but it shows why your builder should explain how the deck footings will handle the clay they find. Our guide to deck footings in North Texas clay covers the options.
Covered decks, railings and stairs: the add-ons that move the total
A roof is the biggest jump. Fixr's 2023 national figures put a covered deck at $40 to $100 per square foot, against $10 to $30 for a simple platform deck.
| Item | Cost | Source |
|---|---|---|
| Platform deck | $10 to $30 per sq ft | Fixr, national, 2023 |
| Raised deck | $25 to $50 per sq ft | Fixr, national, 2023 |
| Two-story deck | $30 to $60 per sq ft | Fixr, national, 2023 |
| Multi-level deck | $30 to $75 per sq ft | Fixr, national, 2023 |
| Covered deck | $40 to $100 per sq ft | Fixr, national, 2023 |
| Railings | $20 to $50 per linear ft | Advantage Lumber, national, 2026 |
| Stairs | $150 to $300 per step | Advantage Lumber, national, 2026 |
| Stairs, with labor | $75 to $450 per stair | Fixr, national, 2023 |
Block Renovation notes that elevated decks cost more because of framing and are less common on DFW's generally flat lots.
Three local points for add-ons:
- Stairs: Frisco's plan reviewers flag that continuous handrails are required on exterior stairs with four or more risers (R318.7.8). Count your steps before you price the railing.
- Metal or vinyl roofs: on Frisco's Form 4038, aluminum, steel or vinyl patio covers and similar structures must be engineered. If you want a metal roof over the deck, ask whether engineering is in the quote.
- Roofs in general: a covered deck is a different project from a deck. Our covered deck cost guide breaks down the roof side.
Does a deck pay off on a Frisco or McKinney home?
Frisco and McKinney aren't Cost vs Value markets, so the nearest published figures are for Dallas. In Remodeling's 2025 Dallas report, a wood deck addition cost $15,841 and added $15,813 in resale value (99.8% recouped), and a composite deck cost $23,519 and added $21,658 (92.1% recouped).
The same report puts the job cost at $15,709 for wood and $23,631 for composite in the West South Central region, and $18,263 and $25,096 nationally. It doesn't state a deck size, so don't read these as a price for your deck.
Size the deck to the house and the street. With median home values of $642,100 in Frisco and $471,800 in McKinney (Census, 2020 to 2024), use the resale figures above as context when you decide how big and how fancy to go, not as a budget.
How to get an accurate deck quote in Frisco or McKinney
Ask every builder to price the same scope in writing, and confirm they are registered with the city. Frisco requires all contractors to be registered before a permit is issued.
Make sure each quote lists:
- Deck size and height, and whether it is attached or freestanding
- The decking material and board line, and what the frame is made of
- Railing type and length, and the number of steps
- Footing type and depth for the clay on your lot
- Tear-out and haul-off of any old deck
- Who pulls the permit, and whether the permit fee is included (in Frisco, $75 plus $0.59 per square foot, up to $550)
- Who prepares the HOA drawings and submits them
- Any lighting, fans or outlets, since those bring electrical permits
In McKinney, pay city permit invoices only through the city's Citizen Self Service portal.
As a sanity check on totals, Fixr's 2023 national figures put a typical project at $9,000 to $20,000, with most people paying around $14,000 for a 320 sq ft composite deck with railings. Advantage Lumber's 2026 national figure for a professionally built deck is $8,000 to $14,000.
Archetex Outdoor Design Co. designs and builds custom composite and wood decks and covered decks in Frisco, McKinney and nearby cities, and Matthew offers a free site visit with a written price. If you want a written price to compare with your other quotes, that's what the visit is for.

