How much does a deck cost in Addison, TX in 2026?
A new deck in the Dallas area typically costs $15 to $30 per square foot installed in pressure-treated wood and $25 to $50 per square foot in composite, according to Block Renovation's 2026 Dallas-area guide. Addison decks tend to be smaller than suburban ones, so the per-foot price matters less than the fixed parts of the job: stairs, railing, and getting materials onto a tight lot.
| Item | Typical installed cost | Source |
|---|---|---|
| Pressure-treated wood deck | $15 to $30 per sq ft (Dallas area) | Block Renovation, 2026 |
| Composite deck | $25 to $50 per sq ft (Dallas area) | Block Renovation, 2026 |
| Cedar deck | $19 to $29 per sq ft (national) | Fixr |
| Ground-level (platform) deck | $10 to $30 per sq ft (national) | Fixr |
| Stairs | $75 to $450 per stair (national) | Fixr |
| Wood railing | $30 to $50 per linear ft (national) | Fixr |
| Metal railing | $45 to $85 per linear ft (national) | Fixr |
| Removing an old deck | $5 to $15 per sq ft (national) | Fixr |
Two worked examples from Block Renovation's ranges (calculated): a 150 sq ft deck comes to about $2,250 to $4,500 in pressure-treated wood and $3,750 to $7,500 in composite, and a 250 sq ft deck to about $3,750 to $7,500 and $6,250 to $12,500. For resale context, the 2025 Cost vs Value report for Dallas puts a wood deck addition at $15,841 with 99.8% of the cost recouped and a composite deck addition at $23,519 with 92.1% recouped. Our deck cost by size guide and Dallas deck cost guide go further. Archetex gives a written price after a free site visit.
Do you need a permit to build a deck in Addison?
For any deck more than 30 inches above grade, yes. The Town of Addison's Residential Projects page lists building or replacing a deck more than 30 inches above grade among the projects that need a permit. The Town's separate permit checklist lists decks without a height, so the Addison service area page recommends calling before you skip one. Building Inspection works out of the Addison Service Center at 16801 Westgrove Drive (972-450-2880), with a 24-hour inspection request line at 972-450-2885.
A few Addison details worth knowing before you apply:
- Codes. Addison adopted the 2024 International Codes, and any submittal on or after June 1, 2024 is reviewed under them.
- Who pulls the permit. Homeowners may do their own work and take the permit in their own name. Any other contractor doing permitted work must be registered with the Town. The Town's additions guide warns that a homeowner permit makes you the responsible party of record, and that unlicensed contractors often ask homeowners to pull one.
- Timing. The same guide says permits are valid for work to begin within six months. After that they expire and you reapply.
- Digging. State law requires a call to 811 at least two days before digging, even in your own back yard, as the Town's guide points out.
For how permits for decks and patio covers work across the area, see our Dallas deck and patio cover permit guide.
Fitting a deck on a small Addison lot or townhome
Most Addison homes are apartments, so a private yard is the exception. In the Town's 2016 housing inventory, single-family homes were 15.3% of all housing units and townhomes 5.8%. The largest single-family neighborhoods were Les Lacs (733 homes), Midway Meadows (284), Addison Place (174) and Oaks North (118). Townhome communities ranged from District A (182 units) and Townhomes of Addison (95) down to small groups like Morris Ave Townhomes (6).
On lots that size, the lines on your survey decide the deck. The Town's guide for additions to existing homes says structures are not permitted to be built over setback lines, easements or property lines. If the structure sits within 3 feet of a required minimum setback, the Town requires a form board survey, which confirms the layout on the ground before work goes on. That is why Archetex draws the deck on your survey first and fits the footings, stairs and railing inside the buildable area, rather than starting with a standard size.
Design tips that work on small Addison yards:
- Stay low where you can. A deck a step or two up from the yard needs less railing and stairs, and keeps the space feeling open. A ground-level deck is often the right answer.
- Match the door height. The deck should meet the back door at the right step, which is why the frame is built to the house's real elevation.
- Plan shade with the deck. A pergola or cover over part of the deck can do more for a small, sunny yard than extra square feet. See covered patios and pergolas.
What Addison's code says about decks and materials
Two parts of Addison's code shape the material choice. The first is the design criteria in the Town's 2024 residential code ordinance: a 115 mph design wind speed, a 6-inch frost line, "moderate" weathering and "very heavy" termite damage risk. The second is upkeep. Addison's list of common residential code violations says decks and other exterior surfaces must be kept in good condition, that exterior wood other than decay-resistant woods must be protected by paint or another protective treatment, and that peeling or flaking paint must be repaired.
| Material | Installed cost | How it fits an Addison yard |
|---|---|---|
| Composite | $25 to $50 per sq ft (Block Renovation, 2026) | The least upkeep, which suits small yards and busy owners. The framing under it is usually treated pine. |
| Pressure-treated pine | $15 to $30 per sq ft (Block Renovation, 2026) | The lowest price. Needs regular protective treatment to stay within the Town's property code. |
| Cedar | $19 to $29 per sq ft (Fixr, national) | A warm wood look for a courtyard. Plan on sealing it to keep its color. |
Archetex builds with all three, plus black metal railing, and will tell you which fits the space and budget. Our composite vs cedar vs pressure-treated comparison and termites and wood decks guide cover the trade-offs in more detail.
Footings, clay and drainage on a tight lot
Frost doesn't set footing depth in Addison; the 6-inch frost line in the Town's code is shallow. The soil and the load do. North Texas Blackland Prairie clays such as Houston Black have high shrink-swell potential, and the USDA's soil description records dry-season cracks up to 4 inches wide at 12 inches deep. Footings are sized and placed for that movement. Our guide to deck footings in clay soil explains why.
Drainage matters more on a small lot, because water has fewer places to go. The deck must not push runoff toward the house or a neighbor. The Town's additions guide also notes that if your property is on a slope, you may be required to install silt fence during construction to keep soil on your property. Archetex looks at grading and drainage as part of how the deck connects to the house.
How Matthew builds a deck in Addison
- Consultation and material selection. We look at the yard with your survey, mark the setbacks and easements, check the door height and talk through how you'll use the space.
- Footings and framing. Footings and framing are sized to the home's elevation and the deck's load, not a one-size prefab kit.
- Decking and railing installation. Boards, stairs and railing go on, with the railing built to code from the start.
- Final walkthrough and cleanup, with care recommendations for the material you chose. On a tight lot, a clean site matters to the neighbors too.
How to choose a deck builder in Addison
Pick a builder who asks for your survey and HOA rules before quoting, and who says plainly who will pull the Town permit. A good written quote for an Addison deck includes:
- the deck's size, height above grade and layout, drawn against your setback and easement lines;
- the decking, framing lumber, and footing count, size and spacing;
- the railing type and length, and any stairs;
- who applies for the permit, whether a form board survey is needed, and whether fees are included;
- how drainage and any silt fence are handled during the work;
- the schedule, payment stages and cleanup.
Homeowners who have reviewed Archetex mention daily communication, punctuality, help with design and a clean site. See our work and our guide on how to choose a deck builder. For HOA paperwork, see deck HOA approval in DFW.
Decks around Addison
Addison sits on Belt Line Road and the Dallas North Tollway, about thirteen miles north of downtown Dallas, according to the Handbook of Texas. Archetex also builds in nearby Farmers Branch, Richardson and Dallas, and our main Dallas deck builder page covers the full service. To start, send a photo of your yard or call Matthew on (430) 318-6275.




