This guide is for homeowners in Frisco, on either the Collin County or Denton County side of the city, who want a real number before calling builders. Frisco sits about 30 miles north of Dallas in western Collin County, with part of the city in eastern Denton County (Texas State Historical Association). These are published market figures, not a quote.
Archetex Outdoor Design Co. builds covered patios in Frisco and across the Dallas area. See our covered patios and pergolas page. Archetex gives a written price after a free site visit.
Frisco TX covered patio construction cost 2026: attached patio cover, pergola, labor and materials pricing
Most homeowners pay $14,000 to $31,000 to put a roof over a patio, and a full DFW-style covered patio with a solid roof, electrical and fans runs $20,000 to $60,000 for 300 to 500 sq ft. The first range is This Old House's 2026 national figure, with an average of $21,000 and high-end structures at $55,000 or more (This Old House, updated April 2026). The second is Block Renovation's 2026 Dallas guide, which prices a 300 to 500 sq ft structure with a solid roof, posts, electrical and ceiling fans (Block Renovation, 2026).
The ranges differ because they price different jobs. Block's assumes a bigger cover with wiring and fans, and moves with cedar or steel framing and a shingle or standing-seam metal roof. This Old House prices the roof structure across all sizes.
No published source gives a Frisco-only average, so treat these as the market range. On top of the build, Frisco adds a permit of $75 plus $0.59 per square foot, capped at $550 (City of Frisco fee schedule, effective October 1, 2026).
Covered patio cost per square foot in Frisco TX (2026) and Dallas Fort Worth
Expect about $15 to $60 per square foot all-in for the roof structure, or $25 to $40 per square foot if the price also includes building the patio floor. The $15 to $60 rate is This Old House's all-in figure for adding a patio roof. The $25 to $40 rate is where Fixr says most covered patio projects fall, inside a wider $14 to $87 per square foot range (Fixr, updated February 2025).
The difference matters. Fixr's numbers include building the patio itself, and its national average of $8,500 is for a 12x18 paver patio with an attached pergola. This Old House prices only the roof over a patio you already have. If you already have a slab, use the This Old House rate.
Don't multiply a per-foot rate by your size and call it a price. This Old House's size rows below are not a straight multiple of $15 to $60.
Covered patio cost by size: 12x12 to 24x36, with the Frisco permit fee
A 20x20 (400 sq ft) roof runs $12,000 to $44,000 nationally, and Frisco's permit for that size works out to $311. The cost ranges are This Old House's published size table. The permit column is our math from Frisco's formula, not city-published figures.
| Size | Roof area | Cost range (This Old House, 2026) | Frisco permit fee (our math from the city formula) |
|---|---|---|---|
| 12x12 | 144 sq ft | $4,200 to $21,500 | $159.96 |
| 12x18 | 216 sq ft | $6,500 to $24,000 | $202.44 |
| 20x20 | 400 sq ft | $12,000 to $44,000 | $311.00 |
| 18x24 | 432 sq ft | $14,500 to $48,000 | $329.88 |
| 24x36 | 864 sq ft | $29,000 to $96,000 | $550 (cap) |
The permit fee hits the $550 cap at about 805 sq ft. For a 20x20, the $311 permit is under 3% of even the low end of This Old House's $12,000 to $44,000 range. For the full breakdown of one size, see what a 20x20 patio cover costs in Dallas.
Attached patio cover vs freestanding: which costs less?
An attached cover usually needs fewer posts and footings, so it often starts cheaper, but the house connection has to be flashed properly and, in Frisco, detailed on the permit. Fixr puts an attached cover at $500 to $25,000 and a freestanding one at $3,000 to $25,000, and explains that a freestanding pergola has four legs while an attached one has two.
Each post needs a footing. This Old House prices concrete footings at $150 to $500 each and says a 12x12 needs at least four. It also warns that structures attached to your house need proper flashing, waterproofing and engineering, and that amateur roof additions often cause water damage to the main house.
Frisco's Form 4038 asks for the attachment in writing: if the cover attaches to the house, the drawings must show the bracket types, the bolt size and length, and what it attaches to, such as brick or the main supports (City of Frisco Form 4038, February 2026). If you have a deck instead of a slab, see our guide to a roof over a deck.
Roof types and materials: aluminum, insulated panel, wood, shingle tie-in and gable
The roof is the biggest swing in the price: This Old House puts a shed roof (a single slope attached to the house) at $1,100 to $10,500, a gable roof at $13,000 to $30,000, and a pergola at $4,000 to $15,000. Its averages are $5,800 for a shed roof, $18,500 for a gable and $6,600 for a pergola.
Material changes the per-foot cost too. Installed prices from both national sources:
| Roof material | This Old House (2026), per sq ft installed | Fixr (2025), per sq ft installed |
|---|---|---|
| Vinyl | $6 to $15 | $5 to $13 |
| Wood | $16 to $38 | $15 to $35 |
| Fiberglass | $18 to $42 | $16 to $39 |
| Aluminum | $22 to $75 | $20 to $70 |
| Insulated panels | $30 to $65 | $26 to $59 |
| Glass | $28 to $50 | $25 to $45 |
Block Renovation's Dallas guide says most DFW covered patios use cedar or treated framing with a shingled or metal roof tied into the home's roofline. Standing-seam metal in black or dark bronze is popular on newer homes, and a shingle roof matching the house is standard on traditional brick homes. No source we found prices the roofline tie-in as its own line item, so ask for it to be spelled out in your quote.
Hail is a real factor here. The National Weather Service says large hail, damaging winds, flooding and tornadoes occur nearly every year in the Metroplex (NWS Fort Worth/Dallas). Block says metal patio roofing resists hail better than shingles, and Class 4 impact-rated shingles cost a 10% to 20% premium.
In Frisco, an aluminum, steel or vinyl structure must be engineered (Form 4038). This Old House puts engineered plans for larger projects at $500 to $2,000. If you are still deciding between a pergola or covered patio, that guide covers heat and shade.
Labor vs materials: what you're paying for
Labor is roughly a third of the bill, about $10 to $35 per square foot, according to This Old House. Fixr puts average covered patio labor higher, at $25 to $40 per square foot, but its projects include building the patio floor.
This Old House also says prices for identical work can vary by up to 20% among qualified contractors, and most projects take two to five days to build. Compare written quotes line by line, not just the total.
Does the quote include the concrete slab?
Often not, so ask: Fixr puts a new plain concrete slab at $6 to $10 per square foot installed, and stamped concrete at $15 to $30. Pavers run $16 to $25 and flagstone $15 to $30 per square foot. Block Renovation's Dallas guide puts a basic 400 to 600 sq ft concrete patio at $3,000 to $8,000.
The slab also has to carry the posts. Frisco's Form 4038 asks for a footer detail sheet: if posts are bolted to the slab, it must show the brackets, bolts and slab depth; if posts go below grade, it must show hole depth, concrete and rebar. Block Renovation's Frisco guide describes Frisco and Collin County as having highly expansive black clay soils that shrink and swell with moisture, which is why footing and slab depth matter here (Block Renovation, Frisco guide, 2026).
If your old patio is cracked or too small, plan a new concrete slab with the cover as one job.
Cost adders: ceiling fans, lighting, outdoor kitchen, screens and gutters
The extras can add up fast: This Old House puts a basic ceiling fan installation at about $300 and professional recessed lighting at $300 to $1,000, and Block Renovation puts a basic grill island at $5,000 to $12,000.
| Add-on | Published cost | Source |
|---|---|---|
| Basic ceiling fan | $100 to $400 | This Old House |
| Basic fan installation | About $300 | This Old House |
| Recessed lighting (professional) | $300 to $1,000 | This Old House |
| Gutters | $3 to $20 per linear ft (about $600 for a 20 ft aluminum section with downspouts) | This Old House |
| Motorized screens or louvers | $2,000 to $5,000 | This Old House |
| Screening an existing covered patio | $5 to $7 per sq ft | Fixr |
| Building a covered, screened-in patio | $30 to $47 per sq ft | Fixr |
| Basic grill island | $5,000 to $12,000 | Block Renovation (DFW) |
| Full outdoor kitchen | $20,000 to $60,000 | Block Renovation (DFW) |
Block recommends at least one ceiling fan per 150 to 200 square feet of covered space, wired during construction rather than added later. By that rule, a 20x20 cover would take 2 to 3 fans (our math). Fans matter in Frisco summers: the NWS says July and August highs are consistently in the 90s and often 100 or more, and the average first 100-degree day at DFW is July 1, with the last on August 27 (NWS Fort Worth/Dallas).
Frisco's fee schedule lists electrical permits at $50 for each permit, with an all-inclusive residential electrical permit at $0.03 per gross square foot, and an outdoor amenity such as a fireplace or kitchen at $75 plus $25 for each additional element, up to $150. Ask your builder whether wiring the fans needs a separate electrical permit on your job. For bigger plans, see outdoor living spaces with kitchens and fire features, or read about screening in a covered patio.
Frisco patio cover permit: fee, documents and what happens if you skip it
Yes, Frisco requires a building permit for every patio cover, priced at $75 plus $0.59 per square foot of gross area, up to $550. The city's Building Inspections FAQ says all accessory structures require a building permit before placement or construction, and that patio covers may be built if they meet the lot's setback and zoning requirements (City of Frisco FAQ).
You apply online as a Residential Building Permit (Other Home Improvements). Form 4038 asks for PDFs of:
- A plot plan or survey marking the structure and its distance to all property lines.
- Framing drawings or a manufacturer's brochure showing length, width, maximum height, front and side elevations, a material list, post size and beam size.
- If attached to the house, the bracket types, bolt size and length, and what it attaches to.
- A footer detail sheet showing how the posts attach.
- Engineering, if the structure is aluminum, steel or vinyl.
Starting without a permit costs more. Frisco charges a double permit fee for non-emergency work that begins without one, so a 20x20 cover would go from $311 to $622 (our math), before any $50 residential reinspection fees.
Frisco publishes no review time; applications are reviewed "as quickly as possible," and you can check status in eTRAKiT or at (972) 292-5301. The city builds under the 2024 International Residential Code with local amendments, effective March 1, 2026 (City of Frisco, Adopted Codes). Frisco's zoning ordinance prohibits an accessory structure in any easement (Zoneomics copy of the Frisco Zoning Ordinance), and the city tells you to contact Building Inspections for your setbacks. Our guide to the Frisco permit process covers contractor registration and inspections in more depth.
HOA approval in Frisco: budget the time, not just the fee
Frisco has more than 200 HOAs, and the city's own patio cover checklist says some subdivisions require HOA approval on top of the permit (City of Frisco, Neighborhoods; Form 4038). Block Renovation says HOA guidelines in master-planned communities including Frisco commonly govern patio cover height, setbacks from property lines, and approved materials and colors.
As one example of what an HOA asks for, The Village at Frisco Lakes says a shingled covered patio roof must be at least 2/12 pitch and match the home's shingles, and its application asks for elevation drawings and fan and light locations, with a $15 application fee (Frisco Lakes Community Association application). Its committee tries to respond within 30 days and must respond within 60, and the form states it is not a building permit. Rules differ by HOA. For the full process and your appeal rights, see HOA approval for a patio cover in Frisco.
Best covered patio builders in Frisco TX: reviews, HOA experience and permits
Pick a builder who will pull the Frisco permit, prepare the drawings your HOA asks for, and put the slab, fans and engineering in writing.
- Registration. Frisco requires contractors to register with Building Inspections before doing work in the city, and you can search eTRAKiT for currently registered contractors (City of Frisco, Contractor Registration). The registration expires the same day as the contractor's general liability insurance.
- Permit. Ask who applies for the permit and whether the fee is in the price.
- Engineering. If the cover is aluminum, steel or vinyl, ask who provides the engineering Frisco requires.
- Line items. Slab, electrical, fans and gutters should each be listed, not buried in one total.
- Reviews and photos. Read reviews you can check yourself, and ask for photos of covered patios the builder has finished.
What a written covered patio quote in Frisco should include
A good quote names the size, roof type and material, how the cover attaches to the house, the footing or slab detail, every electrical item, gutters, the permit and the HOA drawings. Those match what Form 4038 and a typical HOA application ask for.
At Archetex Outdoor Design Co., owner Matthew starts patio and outdoor-living design with how you use the yard, and accounts for grading, drainage and how the space connects to the home. Archetex gives a written price after a free site visit, with no obligation. See our past work, read more about covered patios in Frisco, or book a free site visit. Call or text Matthew at (430) 318-6275. If a deck is also on your list, here is our guide to deck costs in Frisco and McKinney.

