Replacing a fence costs a little more than building a new one, because the old fence has to come out first. Below are the latest published numbers for each part of a Dallas fence replacement, each tied to a named source and dated. For how we build fences, see our page on cedar fence installation in Dallas.
Dallas fence replacement cost per linear foot: 6 foot cedar on steel posts, with removal (2026)
Published installed prices for a wood privacy fence run from about $15 a foot (Fixr’s national cedar range) to $48 a foot (Ergeon’s Dallas wood range), plus about $1 to $10 a foot to remove the old one. No source we could open publishes a Dallas price for a cedar fence on steel posts specifically, so the figures below are for wood and cedar fences in general.
| Source | Published figure | What it prices |
|---|---|---|
| Fixr (Jan 2025, national) | $15 to $30 per ft installed | Cedar fence |
| Ergeon Dallas page (read Nov 2026) | $38 to $48 per ft installed | Wood fence in Dallas |
| Ergeon cedar page (read Nov 2026) | $41 to $70 per ft installed, median about $52 | Cedar fences from Ergeon’s projects |
| Ergeon wood fence costs (July 2026) | $25 to $55 per ft | A 6 ft privacy fence, materials and labor, national |
| Fixr (Jan 2025, national) | $1 to $3 per ft more than a new install | Replacing a privacy fence, for removal and disposal |
Fixr puts the replacement of 150 linear feet of privacy fence at $2,400 to $13,200 across all materials, and a full fence replacement at $1,500 to $10,000 nationally. Dallas ranges for cedar on steel posts that show up in AI answers couldn’t be traced to a checkable source, so we don’t use them.
Here is one worked example, which is our arithmetic and not a quote. 150 ft of 6 ft wood privacy fence at Ergeon’s Dallas rate of $38 to $48 a foot is $5,700 to $7,200. Add $150 to $1,500 for tear-out (Ergeon’s bundled $1 a foot up to its $10 a foot haul-away figure) and one walk gate at Ergeon’s $399 average, and the total lands around $6,250 to $9,100.
What it costs to replace 100, 150 and 200 ft of fence, by material
On a 150 ft back yard, the new fence alone runs from about $2,250 at Fixr’s national cedar range to $10,500 at the top of Ergeon’s cedar range, and more for board-on-board or horizontal styles. These totals are our arithmetic: each source’s per-foot range multiplied by the length, before tear-out, gates, stain and permit.
| Material (source) | Per ft | 100 ft | 150 ft | 200 ft |
|---|---|---|---|---|
| Cedar, national (Fixr) | $15 to $30 | $1,500 to $3,000 | $2,250 to $4,500 | $3,000 to $6,000 |
| Wood, Dallas (Ergeon) | $38 to $48 | $3,800 to $4,800 | $5,700 to $7,200 | $7,600 to $9,600 |
| Cedar (Ergeon) | $41 to $70 | $4,100 to $7,000 | $6,150 to $10,500 | $8,200 to $14,000 |
| Board-on-board wood (Ergeon) | $51 to $82 | $5,100 to $8,200 | $7,650 to $12,300 | $10,200 to $16,400 |
| Pressure-treated pine (Ergeon) | $36 to $72 | $3,600 to $7,200 | $5,400 to $10,800 | $7,200 to $14,400 |
| Horizontal wood (Ergeon) | $63 to $129 | $6,300 to $12,900 | $9,450 to $19,350 | $12,600 to $25,800 |
| Chain link, Dallas (Ergeon) | $18 to $22 | $1,800 to $2,200 | $2,700 to $3,300 | $3,600 to $4,400 |
| Metal or aluminum, Dallas (Ergeon) | $43 to $52 | $4,300 to $5,200 | $6,450 to $7,800 | $8,600 to $10,400 |
Fixr’s own 150 ft figure for a board-on-board (shadow box) privacy fence is $3,150 to $6,750, about $21 to $45 a foot (our arithmetic), well under Ergeon’s board-on-board range. Ergeon says board-on-board costs roughly 40% more than a basic dog-ear fence. If you’re deciding between styles, see board-on-board vs side-by-side, and for the slatted look, our page on horizontal cedar fences.
Fixr says the average yard has about 209 linear feet of fence. For new-fence pricing by style, height and cedar grade, see what a new cedar fence costs in Dallas.
Old fence tear-out and haul-off: what removal adds
Removing an old fence runs about $2 to $10 a foot when it is priced as its own job, but Ergeon says it adds only about $1 a foot when the same crew is building the new fence.
| Basis (source) | 100 ft | 150 ft | 200 ft |
|---|---|---|---|
| Fixr removal and hauling, $2 to $5 per ft | $200 to $500 | $300 to $750 | $400 to $1,000 |
| Ergeon haul-away labor, $3 to $10 per ft | $300 to $1,000 | $450 to $1,500 | $600 to $2,000 |
| Ergeon standalone wood fence removal, $3 to $7 per ft | $300 to $700 | $450 to $1,050 | $600 to $1,400 |
| Ergeon, bundled with a new install, about $1 per ft | About $100 | About $150 | About $200 |
Totals are our arithmetic on each source’s per-foot figure. Ergeon’s removal guide also puts hauling and dump fees at $100 to $500 per truckload. Ergeon says its own Dallas quotes include full demo and haul-away, which is one company’s policy. Whoever you call, ask whether removal is in the price or a separate line.
Old concrete footings: the line item that surprises people
Old posts set in concrete cost $25 to $50 more each to remove than posts set in plain soil, according to Ergeon. On a 150 ft fence that is roughly $500 to $1,000 extra (our arithmetic).
That assumes about 20 posts: Ergeon says wood fence posts are usually set every 8 ft, 2 to 4 ft deep with cement, and 150 ft at 8 ft spacing is about 20. Old footings can be dug out or left in the ground with the new posts set beside them, so ask each company which it plans and whether the price covers it.
Steel vs wood posts in Dallas clay when you replace
Installed post prices are close, at $10 to $60 for a metal post and $10 to $50 for a wood post in Fixr’s guide, so the bigger issue in Dallas is the soil and termites at the ground line.
The Texas State Soil sheet (USDA NRCS, hosted by the Texas Water Development Board) says the Houston Black clays of the Blackland Prairie, which runs from north of Dallas to San Antonio, shrink and swell markedly as their moisture changes. A North Dallas fence company, Top Rail Fence, says posts need to be set 24 to 30 inches deep with concrete for that reason. Texas A&M’s entomology program says wood touching soil is a high-risk entry point for subterranean termites, which are found across Texas.
Archetex builds cedar fences on galvanized steel posts. For the full comparison, see steel vs wood fence posts in DFW clay.
Replace pickets only, a few sections, or the whole fence?
If the posts are sound, swapping pickets ($150 to $350) or panels ($200 to $750) costs far less than a full replacement, per Fixr. If posts are rotten or leaning along the run, replacing the fence is usually the better spend.
Fixr puts the average fence repair at $500 nationally (most jobs $200 to $850), a single post at $200 to $500 and straightening a leaning fence at $200 to $800. Ergeon says warped pickets can be swapped one at a time, but serious structural damage points to replacement.
Repair or replace: signs your Dallas fence is done
Fixr says fences usually last 10 to 20 years, and a fence over 10 years old that keeps needing costly repairs may be due for replacement. Ergeon points to damage on at least 20% of the panels, and Top Rail Fence to structural damage on more than a third of the fence or soft posts at the base.
Ergeon also flags a fence over a decade old or one that sags. Expected life by material:
| Fence | Expected life | Source |
|---|---|---|
| Cedar | 15 to 30 years | Ergeon |
| Western red cedar, installed and maintained, Fort Worth | 15 to 20 years | Top Rail Fence (June 2026) |
| Well-built wood fence with routine upkeep | About 20 years | Fixr |
| Pressure-treated pine | 10 to 15 years | Fixr |
| Galvanized chain link | 20 to 50 years | Top Rail Fence |
Gates and staining on a replacement fence
A walk gate averages about $399 and a double or driveway gate about $735 in Ergeon’s 2026 data, and staining runs from $1 to $13.50 a foot depending on the source.
Ergeon’s typical ranges are $245 to $568 for a walk gate and $483 to $1,007 for a double gate. Fixr puts installed wood gates lower, at $52 to $300 per gate. If you’re replacing a wide or automated entry, see our page on driveway gates.
The staining figures conflict, so we show both:
- Fixr: $7 to $13.50 a foot to stain a privacy fence, or $1,050 to $2,025 on 150 ft (our arithmetic). Fixr also says painting or staining an average-size fence costs around $1,500.
- Ergeon: about $1 to $4 a foot each for staining, sealing or painting, or $150 to $600 on 150 ft (our arithmetic).
Ask whether a stain price covers one side of the fence or both.
Do you need a permit to replace a fence in Dallas? (and HOA rules)
In the City of Dallas, a 6 ft fence in a back or side yard generally needs no permit, but a fence over 6 ft, or over 4 ft in a front yard, does, and no fence may be taller than 9 ft.
The city’s documents don’t say whether a replacement is treated differently from a new fence, so confirm with the city before work starts. Historic, conservation and planned development districts have extra requirements, and a fence in an easement needs written approval from the utility (City of Dallas fence permit checklist, 2026). Permits are filed online in DallasNow; the city’s guide shows a $15 technology fee in its example but doesn’t list the permit fee itself. Nationally, Fixr puts fence permit fees at $70 to $400. Ergeon says about 26% of its Dallas fence projects involved permits.
If you have an HOA, Texas Property Code §202.023 says it can’t ban a perimeter fence, but it may regulate the type of fencing, so get its rules before you collect quotes. Before any posts come out of the ground, call 811 at least two business days ahead. The Railroad Commission of Texas says the call is required and free. For suburb rules, see our guide to fence permits in Plano, McKinney and Frisco.
Replacing a shared fence: who pays?
Texas has no statute that splits the cost of a boundary fence, so agree with your neighbor in writing before the old fence comes down.
The Texas State Law Library says that without a state statute, boundary fence disputes come down to court cases. Settle cost, style and which side faces each yard up front. Our post on who pays for a shared fence in Texas covers this in more detail.
Storm-damaged fence: will insurance pay for the replacement?
The Texas Department of Insurance says that if a fence is damaged by wind and your policy covers wind, it will probably pay, but usually at actual cash value, within your other-structures limit and after your deductible.
TDI says other-structures coverage is usually 10% of the house’s insured value, so a $300,000 house would have $30,000 for structures like fences. Outside the coast, Texas home policies usually include wind and hail. Fixr puts storm damage repair at $300 to $2,500. Call your agent before you sign a replacement contract.
How to compare fence replacement quotes in Dallas: reviews, Google rating and warranty
Put every quote on the same footage, height, style, posts, removal, footings, gates, stain and permit, then read each company’s recent Google reviews and ask for its warranty terms in writing. If one total is far below the others, check which line is missing.
- Total linear feet, measured on site, and the height of each run.
- Style and wood: side-by-side, board-on-board or horizontal, cedar or pine.
- Post material, depth and whether posts are set in concrete.
- Tear-out and haul-off, included or a separate line.
- Old concrete footings: pulled out or left in place, and the price per post.
- Gates: how many, how wide, and the hardware.
- Stain or sealer, and whether it covers one side or both.
- Who handles the permit and the 811 call.
- Cleanup at the end.
- Warranty: what it covers and for how long, written into the contract.
Archetex Outdoor Design Co. is a Dallas-based design-and-build company owned by Matthew, rated 5.0 on Google from 17 reviews. Archetex builds cedar privacy, board-on-board and horizontal fences on galvanized steel posts, laid out to the property’s real lines and grade, and finishes each job with a walkthrough that checks every gate.
Archetex serves Dallas, Richardson, Garland, Plano and Rowlett, among other nearby towns, and gives a written price after a free site visit. Call or text Matthew at (430) 318-6275, or contact us to book a visit.

