Pavilion prices online run from about $3,000 for a kit to $60,000 for a finished Dallas build, because each guide is pricing a different job. A kit is materials only, HomeGuide's size table is the structure without a foundation, and Block Renovation's Dallas range is a finished, wired structure. If you want to see what we build, start with the backyard pavilions we build in Dallas.
Dallas TX backyard pavilion cost in 2026: freestanding pavilion pricing
Most published figures put a structure-only pavilion between about $7,000 and $24,000 for common sizes, and a finished Dallas build with a solid roof, wiring and fans at $20,000 to $60,000.
HomeGuide's national guide, dated October 2023, puts a backyard pavilion at $35 to $60 per sq ft installed, and says those prices exclude foundation work and assume a base already exists. Block Renovation's 2026 Dallas guide is the only Dallas figure we found, and it says "covered patio," not pavilion: $20,000 to $60,000 for a 300 to 500 sq ft structure with a solid roof, posts, electrical and ceiling fans.
| Source and date | Published figure | What it prices |
|---|---|---|
| HomeGuide pavilion guide, October 2023 (national) | $35 to $60 per sq ft installed; 20x30 at $21,000 to $36,000 | Structure on an existing base, foundation work excluded |
| HomeAdvisor gazebo and pavilion guide, 2022 (national) | Residential pavilions $8,100 to $20,000 | Residential pavilion builds |
| Block Renovation Dallas guide, 2026 | $20,000 to $60,000 for 300 to 500 sq ft | Covered structure with solid roof, posts, electrical and fans |
| i30 Builders, one DFW builder, 2026 | Cedar pergola $75 to $100 per sq ft; attached cedar solid-roof patio cover $90 to $130 per sq ft | One builder's pergola and patio cover rates (no pavilion line) |
Budgets of $15,000 or $25,000 sit between the two scopes. We found no source for a Dallas pavilion average, so we won't make one up. The i30 rates are for pergolas and patio covers, and we don't apply them to pavilion sizes.
Dallas DFW backyard pavilion cost: 12x16, 16x20 and 20x20 custom pavilion installed
HomeGuide prices a 12x16 pavilion at $6,700 to $11,500, a 16x20 at $11,200 to $19,200 and a 20x20 at $14,000 to $24,000 installed, before any foundation work. The rows are from HomeGuide's October 2023 guide, repeated unchanged in its November 2025 gazebo guide.
| Size | Sq ft | HomeGuide installed, no foundation (2023) | Western Timber Frame package, structure only (2026) |
|---|---|---|---|
| 12x12 | 144 | $5,000 to $8,600 | No row |
| 12x16 | 192 | $6,700 to $11,500 | $14,700 (base tier) to $51,700 (top tier) |
| 16x20 | 320 | $11,200 to $19,200 | $21,000 (base tier) to $77,300 (top tier) |
| 20x20 | 400 | $14,000 to $24,000 | $24,900 (base tier) to $98,100 (top tier) |
| 20x30 | 600 | $21,000 to $36,000 | No row |
The Western Timber Frame column is one Utah timber-frame maker's 2026 list prices for Douglas fir pavilion packages with freight included. Installation and permits are not included, and species options and site conditions are quoted separately.
Small pavilions cost more per square foot. i30 Builders points out that the posts and footings don't shrink with the size of the structure. No source publishes a Dallas cedar pavilion price by size, so treat the table as a starting range.
What a full-scope pavilion quote adds: footings, slab, roof, wiring and permit
The structure is only part of the bill. Piers, a slab, the roof finish, wiring and the permit are often priced separately, and HomeGuide's size table leaves the foundation out.
Here is our arithmetic for a 16x20 (320 sq ft) from HomeGuide's 2023 rates and City of Dallas figures. We list the pieces, not a total, because every yard differs.
- Concrete pier footings: $125 to $300 each, and a pavilion needs at least 4 (HomeGuide). Four to six piers comes to $500 to $1,800.
- A new concrete slab: $5 to $10 per sq ft (HomeGuide), or $1,600 to $3,200 for 320 sq ft. Block Renovation puts a basic 400 to 600 sq ft Dallas concrete patio at $3,000 to $8,000, and says stamped concrete adds $3 to $10 per sq ft.
- Ceiling fans: $150 to $400 per fan to install (HomeGuide). Block Renovation suggests one fan per 150 to 200 sq ft of covered space, which is about two fans on a 16x20.
- Dallas plan review: $0.046 per sq ft or $577, whichever is greater, on the city's July 2025 fee schedule. Other fees apply and the city sets final fees at submittal.
This is why full-scope DFW quotes run higher. i30 Builders says its patio cover range includes cedar posts, beams and rafters on steel bases, footings set for North Texas clay, roof decking and roofing, gutters, plans, engineering and the permit when required, and stain.
Cedar, pressure-treated or steel: pavilion cost by material
Cedar costs more than pressure-treated pine, and steel or aluminum framing changes both the price and the look, but no guide we found prices the three side by side for pavilions. The closest numbers are HomeGuide's patio cover figures.
Block Renovation says most DFW covered structures are framed in cedar or treated lumber with a shingled or metal roof. HomeGuide lists the material (metal, vinyl or cedar-framed), size, brand, custom vs kit, delivery (from $100) and the permit as the main cost factors, and notes that large hardwood pavilions need stronger footings. Its covered patio guide, the closest proxy, puts a solid wood patio cover at $60 to $120 per sq ft installed, aluminum at $20 to $50 and a steel freestanding gazebo-style cover at $15 to $30. Those are patio cover prices, so use them to compare materials, not to price a pavilion. Western Timber Frame bases its packages on Douglas fir and quotes other species separately. Matthew has built with both cedar and pressure-treated pine.
Metal standing-seam vs shingle roof on a Dallas pavilion
Metal costs more per square foot of roofing than asphalt shingles but resists hail better, which matters in North Texas. HomeGuide's 2023 pavilion guide puts asphalt shingles at $3 to $5 per sq ft of roof and metal at $5 to $16.
| Roof finish | Roofing only, per sq ft of roof (HomeGuide, 2023) | Gable roof over a 200 sq ft patio, installed (HomeGuide, 2025) |
|---|---|---|
| Asphalt shingle | $3 to $5 | $70 to $130 per sq ft ($14,000 to $26,000) |
| Metal | $5 to $16 | $70 to $140 per sq ft ($14,000 to $28,000) |
| Clay tile | $8 to $25 | $75 to $150 per sq ft |
The second column shows that the roof finish changes the total less than the structure under it does. On HomeGuide's 200 sq ft gable example, metal tops out only about $2,000 above shingles (our arithmetic).
Block Renovation's Dallas guide says DFW hail can be golf-ball sized, metal roofing on patio covers holds up to hail better than shingles, and Class 4 impact-rated shingles are worth a 10% to 20% premium. It adds that standing-seam metal in black or dark bronze is increasingly popular, while shingles that match the house suit traditional brick homes.
Footings and slab on Dallas expansive clay
Dallas sits on Blackland Prairie clay that shrinks and swells with moisture, so a pavilion's piers and slab need to be designed for it rather than set like a kit. The USDA says Houston Black soils cover about 1.5 million acres from north of Dallas to San Antonio, and their very high shrink-swell potential commonly limits building site development.
In Dallas, the footing inspection happens after the footing holes are dug and any required steel is in place, before the concrete is poured. We found no source that sets a pier depth or diameter for pavilions on Dallas clay, so we won't quote one.
Matthew sizes footings and framing to the load and the site, the same approach he uses on decks, not a one-size prefab kit. His designs also account for grading, drainage and how the structure connects to the house.
Fans, lights and power: wiring a pavilion in Dallas
Plan the wiring before the roof goes on. Dallas requires a licensed electrician for electrical work, and you should plan on an electrical permit for new circuits in a new pavilion.
The city's small-wiring exemption covers work inside an existing occupied structure, not a new pavilion. Block Renovation says electrical permits are needed for any hardwired lighting, outlets or appliance connections, and recommends wiring fans during construction, not later.
| Add-on | Published cost (HomeGuide, 2023) |
|---|---|
| Light fixture | $80 to $300 per fixture |
| Outdoor outlet | $180 to $350 each |
| Ceiling fan installation | $150 to $400 per fan |
Adding an outdoor kitchen or fireplace under a pavilion
A kitchen or fireplace can cost as much as the pavilion itself. Block Renovation's 2026 Dallas guide puts a full outdoor kitchen at $20,000 to $60,000 and an outdoor fireplace at $5,000 to $20,000.
The same guide puts a grill island at $5,000 to $12,000 and a gas fire pit table at $2,000 to $6,000.
Block suggests putting the kitchen under the cover and close to the house so the gas, water and power runs are shorter. A gas line needs a licensed plumber and a separate gas permit. Those are separate trades, so ask how each is handled. For a whole-yard budget, see our outdoor living space cost guide and our page on full outdoor living spaces.
Pavilion vs pergola vs attached patio cover: cost difference
A pergola is usually the cheapest because it has no solid roof, a freestanding pavilion sits in the middle per square foot, and an attached cover tied into the house roof can cost the most. HomeGuide's 2023 comparison puts pergolas at $15 to $65 per sq ft installed and pavilions at $35 to $60.
The difference is the roof: HomeGuide says a pavilion's solid roof gives full shade, while a pergola's slatted roof gives partial shade. Western Timber Frame says it typically prices its pavilions about 40% higher per sq ft than its pergolas because of the roof structure, sheathing, roofing and engineering. For pergola sizes and prices, see our Dallas pergola cost guide.
Attached covers are a different calculation. Fixr says a freestanding structure needs more support (a freestanding pergola has four legs, an attached one two). But HomeGuide says matching an attached cover to the home's roof in a seamless transition costs more than a freestanding cover, and it prices a 20x20 gable roof attached to the home at $28,000 to $62,000, including posts, footings and framing. That is well above its $14,000 to $24,000 for a 20x20 pavilion, though the pavilion row leaves the foundation out, so the scopes are not equal. See the 20x20 patio cover cost guide for the attached side.
Block Renovation says a covered patio, not a pergola, is the defining Dallas structure because a pergola gives too little shade for Texas summers, which regularly pass 100°F from June to September, and a cover cuts the temperature underneath by 15 to 25 degrees. If you are still deciding, read covered patio or pergola for North Texas, or see our covered patios and pergolas.
Pavilion kit vs custom-built: what you save and what you give up
A kit costs less up front, about $3,000 to $5,000 in materials for common wood and vinyl kits, but you still pay for assembly, footings, a base and any permit (HomeGuide, 2023). HomeGuide lists materials-only kits at $3,000 to $3,800 for a 12x12, $3,900 to $5,000 for a 12x16 and $5,200 to $6,000 for a 16x16, and says labor is 10% to 35% of a pavilion's total, low for kits and high for custom builds.
A custom build is sized to your yard, with footings designed for the soil. i30 Builders, one DFW builder, contrasts a cedar pavilion on engineered piers with a big-box kit gazebo that usually anchors to the slab surface rather than to a pier.
Do you need a permit for a pavilion in Dallas? (and HOA approval)
Usually. Dallas only exempts one-story detached patio covers under 200 sq ft outside the front and side setbacks, so a 12x16 (192 sq ft) may qualify but a 16x20 (320 sq ft) or 20x20 (400 sq ft) needs a permit.
That is our reading of the city's Chapter 52, which does not use the word pavilion, so confirm with the city at 214-948-4480 before you build. A few more rules from the City of Dallas:
- The exemption does not apply in historic, conservation or planned development districts, and attached structures are not covered by it.
- Any wiring still needs an electrical permit.
- Planned development, specific-use-permit and deed-restricted areas carry a 10% surcharge on the total permit fee.
- Historic districts need a certificate of appropriateness before work starts.
- Building without a permit can bring an investigation fee and fines up to $2,000 per offense.
Dallas has no flat permit fee, and final fees are set at submittal, so we don't give a total. The city's DallasNow portal has a guide for a residential accessory structure permit. Our Dallas permit guide walks through the fee schedule.
In the suburbs, the HOA often comes first. Block Renovation says HOAs in Frisco, McKinney, Prosper, Southlake, Allen and Flower Mound commonly cap height, require setbacks often 5 to 15 feet from rear and side lines, and approve materials and colors, so ask the architectural review committee before getting bids. See HOA approval in Plano and Frisco.
How long does it take to build a backyard pavilion?
The build itself is usually days, not weeks, but HOA review, the permit and inspections set the calendar. HomeGuide's gazebo guide, the closest figure we found, says a custom build takes at least 2 to 5 days, plus time to pour and cure a slab.
In Dallas, inspection requests need at least one working day's notice, the footing inspection comes before concrete, and the permit must be posted on the front of the property before work starts. No source publishes a Dallas permit or HOA review time, so ask your builder.
How to compare pavilion quotes in Dallas (what to ask)
Ask every builder for an itemized written quote that lists footings, slab, framing, roofing, electrical and permit fees separately, so you can compare like with like. HomeGuide also says to get several bids, be wary of the cheapest one, and pay the final amount only when the job is complete.
- Footings: how many piers, and how they are set for clay.
- Slab or base: new concrete, stamped finish or an existing patio.
- Framing: size, the longest open span, freestanding or attached, and the wood or metal used.
- Roof: shingle, metal or tile, whether it matches the house, gutters and any tongue-and-groove ceiling.
- Electrical: fans, lights and the circuit to run them, plus the electrical permit.
- Permit and HOA: who prepares drawings, who pulls the permit, who books the footing inspection, and what city fees are expected.
- Extras: tearing out an old structure, stone columns, cleanup.
Also ask for photos of completed pavilions and references, the build time, and what unexpected costs tend to come up.
Archetex does not publish set prices, because every yard is different. Matthew starts with how you use the yard, then accounts for grading, drainage and how the pavilion connects to the house. The site visit is free, and you get a written price with no obligation. Archetex is rated 5.0 on Google from 17 reviews. You can call or text Matthew at (430) 318-6275.

